- Jaw Mobile Crushing Plant is equipped with a high performance mobile jaw crusher, and vehicle-mounted feeder vibrating screen and high-intensity short length, light weight; mobility strong adaptability
- DMAN 300 TPH Stone Production Line in Suhar-Liwa, Oman
1.Crushing industry is booming in Gulf Region.
Oman has already taken action and planed to promote the steady growth of economic by investing infrastructure construction. Government will issue billions of Rial for the infrastructure construction in 2013.
Furthermore, the other Gulf Region countries like Saudi Arabia, UAE, Kuwait, Iran, Qatar have increased the investment on their infrastructure recent years. It indicates that crushing industry has a bright future in Gulf Region.
Crushing industry is booming in Gulf Region. Many new investors want to enter this industry. But usually, setting a quarry plant is a big project, it needs big money in the starting stage.
The crushing line below we designed is very popular in Gulf Region, it is very much suitable for the investor who want to join this business.
2.Case Study:
Sohar-Liwa 300 TPH stone production line
Client materials: Gabbro
Max feeding: 500mm
Discharge: 0-3mm, 3-5mm, 5-8mm/0-5mm, 5-10mm, 10-22mm, 22-30mm(Oman standard)
Capacity: 300t/h
3.The configuration and process of the crushing plant
Dingmanengineers design the configuration according to customer demand as follows:
Main Equipment:
NO Equipment Model Motor(KW)
1 Hopper LC3000*4000
2 Vibrating feeder GZD1300*4900 22KW
3 Jaw Crusher PEW860 132KW
4 Impact Crusher PFW1214III 132KW
5 Vibrating screen 4K2160,3Yk1548 37KW,15KW
4. The advantage of this crushing solution,
1. Reasonable Investment:
If smoothly, the client can do the cost recovery within half to 1 year and then get profit.
2. Short manufacture cycle:
The manufacturing time for this small plant is around 50 days, faster than the other suppliers in and out of China.
3. Rapid installation:
Our experienced engineer can install you crushing line in 2-3 month, Low time consumption allow our client get their investment back soon.
4. Simple operation and maintenance:
Services of skilled technician(s) to supervise the assembly, installation, commissioning and train the local operator about how to operate and maintenance the project will be supplied after the seller confirms the preparation for installation is ready in the buyer’s site.
5. Resident engineer and prompt after-sale service:
We have our office set in Dubai, and we have experienced engineer there, who can provide prompt and good after-sales services for Gulf Region countries.
Customer Evaluation:
- (Before using Dingmanequipments) doubted about the quality of Dingmancrushers, as they heard some bad news from friends who using crushers from some small China manufacturers.
After their visiting to DingmanShanghai Headquarters and factories, they chose to trust ZENITH.
- (After Dingmancrushers running in their site) “Dingmancrushers running as well as the good-quality crushing equipments from Europe, which are very stable and easy to operation, however, its price is much reasonable at the same capacity. We are considering purchasing the second crushing line from ZENITH”
- Tanzania 100-120 TPH Stone Production Line
1.Crushing industry is booming in East Africa.
As infrastructure construction is being encouraged and enhanced by the government in East Africa, we
As East Africa countries like Tanzania, Kenya, Ethiopia, Zambia, Uganda has increased the investment on their infrastructure construction recent years. The demand of quarry aggregates is booming. Therefore, the market of crushing equipments is prosperous.
There more and more investors in quarry business. And to make an investment with little risk is very important.
The crushing line below we designed is a standard configuration and is popular in East Africa. it is very much suitable for the investor who want to quickly join this business.
2.Case Study:
Tanzania 100-120 TPH stone production line
Client materials: granite
Max feeding: 500mm
Discharge: 0-5mm, 5-10mm, 10-20mm
Capacity: 100-120t/h
Voltage: 380V 50Hz
- DMAN Stone Crusher in Angola
Case StudyA Crushing Plant invested by Chinese Government aims to crush Granite Stones for road construction. The detailed requirements are as following:Raw material: GraniteFeeding Size: 800mm Output size: 0-5mm, 5-20mm, 20-40mmProcuction ProcessThe raw materials are unloaded by trucks into the hopper. By vibrating feeder, raw materials are regularly fed into Primary Jaw Crusher which could reduce 800mm stones into approx.150mm. The half-finished products from Jaw Crusher will be conveyed by Belt Conveyor. #1 and piled up into the transmediate storage hopper. Another small Feeder under the stockpile will feed the stored materials regularly into Belt Conveyor #2 so as to transport the material to the following Cone Crusher S51''. After secondary crushing, products will be conveyed bt Belt Conveyor #3 & #5 to the Vibrating Screens for size separation: 0-5mm, 5-20mm, 20-40mm and +40mm. The unrequested products which are bigger than 40mm will be returned to the tertiary Cone Crusher S36'' by Belt Conveyor #4 for further crushing, while products with requested size will be piled up by Belt Conveyor #6. Natural fines from the grizzly bar of the vibrating feeder are conveyed by Belt Conveyor #7 as separate stone scrap.Flow Chart for This Crushing Plant
- Manufacturing Sand From Rocks With B-VSI-7611 in UAE
The introduction of B series Deep Rotor VSI cone crusher is born to resolve two problems in quarry field: the shortage of natural sand resources driving investors to resort to sand making machinery for artificial sand; the increasingly strict market demand for better aggregate shape.
Case StudyA quarry operator in the UAE plans to expand their crushing and screening plant in order to cope with an increasing demand in chip and sand in the market.The raw material is marble. They already have one primary jaw and a secondary impact crusher. Final products they required is 0-5mm; 5-10mm; 10-20mm (total 3 products). Yet, material comes out from the impact crusher are mostly above 20mm. The secondary impact crusher has been running at smallest discharge opening, yet still unable to yield products with required fines requirements.SolutionAfter consultation with Dingman engineer, they would like to add a B Series Deep Rotor VSI-7611 in the existing plant. This machine will further process the current outputs (20-40mm) into 0-5mm; 5-10mm; 10-20mm.The B-VSI is designed to produce find sand size product with good cubical product shape. After commissioning, the capacity of the plant is proved to be well increased to the capacity of 150t/h which lives up to his previous expectation.Advantage of B-Deep Rotor VSI Crusher Rotor is the heart of VSI, and the success of Dingman B-VSI should be attributed to the application of advanced design of its deep rotor.The deep rotor is about 50% bigger than that of normal rotor, which means there is a greater space between distributor and feed eye ring, as well as between the upper and lower wearing plates. Capacity in this way is increased at least by 30% compared to the traditional VSI crusher.
- Kenya 100 TPH Mobile Stone Production Line
1. BackgroundRecent years, East Africa country have already taken action to improve their country's infrastructure to promote the development of economic. it is accompanied with the booming in quarry industry.The quarry business arises like mushrooms after rain, and the traditional stationary plant can not feed the requirement of our customers, our Portable crushing plant becomes popular and popular in Africa market against its advantages of prompt installation and convenient transportation.Below let us study the case of our 100tph mobile plant in Nairobi, Kenya. 2.Case Study:Kenya 100 TPH Mobile Stone Production LineRaw Material: basalt Feed Size: 500mm Output Size Requirement: 0-5mm, 5-20mm, 20-40mmCapacity: about 100TPH
- Background:Ghana has already taken action and planed to promote the steady growth of economic by investing infrastructure construction.
- Case Study
As the finished product is for a paper making company, our buyer from Belgium needs a mill to get limestone powder. The required output size is D90=105μm, required capacity is 3-5t/h.
Solution
Since this client just needs medium output size, our MTM Medium Speed Trapezium Mill is suitable for him; Meanwhile, the required capacity is low, so the smallest model MTM100 is his best choice.
Conclusion
Under the guidance of our engineer, they have finished the installation and commission. The classifier is adjusted for required size and the capacity has reached more than 4t/h. Now the plant is running stably with good performance.
- XZM221 Ultrafine Mill in Egypt
Materiel: Talc, Calcium carbonate
Grain size of finished product and capacity: 1250mesh -1.5tons
This case's location: CAIRO-EGYPT
Case Study
A factory in Egypt intends to set up a talc and calcium carbonate powder processing plant, and they heard about Zenith from our old clients there, so they have interest to cooperate with us. Their requirement is powder fineness 1250 mesh and capacity 1.5 tons per hour.
Solution and Conclusion
According to their needs, we recommend them to use our XZM221 Ultrafine mill for this project. XZM Ultrafine mill is our specially designed machine for superfine size 325-2500mesh. It is a complete plant including small hammer crusher, bucket elevator, hopper, vibrating feeder, classifier, pulse bag filter, cyclone collector, pipes and all necessary parts. The small model XZM221 can reach capacity about 1.2-2 t/h when output size is 1250mesh; Under the guidance of our engineer, they have finished the installation and commission successfully. Now the plant is running stably, and they are very satisfied with it.
- Grinding Plant in Tunis
Materiel: dolomite
Grain size of finished product and capacity: 100 mesh ( d90% ), 325 mesh ( 10% )
Capacity: 8 tons per hour.
This case's location: Thailand
Case Study
As a dolomite supplier for fertilizer company, the client in Tailand needs to get the dolomite powder in 100 mesh ( d90% ), 325 mesh ( 10% ), and the capacity required is 8 tons per hour.
Solution
MTW series and MTM series are suitable for processing dolomite, at first the client had chosen our MTW110 Trapezium Mill, but since the capacity of MTW110 can not reach to 8 tons per hour, we recommended MTM130 Trapezium Mill to him and the order was finalized after the client visited our company.
Conclusion:
One engineer was sent to Tailand after the machine arrived for the installation and commissioning. The client speaked highly of our engineer and writed one commendatory letter by himself and sent it to our after-sale department. Up to now the machine runs very stably.
- Construction and demolition (C&D) materials account for almost 22 percent of the waste stream. Many of these materials can be reused or recycled, thus prolonging our supply of natural resources and potentially saving money in the process.
Common Construction and demolition materials include lumber, metals, drywall, masonry (brick, concrete, etc.), carpet, plastic, pipe, paper, cardboard, rocks, dirt, or green waste related to land development. Of these, metals are the most commonly recycled material while lumber makes up the majority of debris that still goes to a landfill.
Construction waste recycling is the separation and recycling of recoverable waste materials generated during construction and remodeling. Some materials can be recycled directly into the same product for re-use. Others can be reconstituted into other usable products. Unfortunately, recycling that requires reprocessing is not usually economically feasible unless a facility using recycled resources is located near the material source. The most important step for recycling of construction waste is on-site separation. Initially, this will take some extra effort and training of construction personnel. Once separation habits are established, on-site separation can be done at little or no additional cost.
Wap Edition
